Dell Networking N4000 Series Configuration Manual page 694

Command
protocol vlan group all
groupid
interface
interface
protocol vlan group
groupid
exit
vlan 5
protocol group
vlanid
CTRL + Z
show port protocol [all|
groupid
]
694
Configuring VLANs
Purpose
(Optional) Add all physical interfaces to the protocol-
based group identified by
interfaces to the protocol-based group as shown in the next
two commands.
groupid
Enter interface configuration mode for the specified
interface.
interface
gi1/0/8.
Add the physical unit/port interface to the protocol-based
group identified by groupid.
groupid
Exit to global configuration mode.
Enter VLAN 5 configuration mode.
groupid
Attach a VLAN ID to the protocol-based group identified
by groupid. A group may only be associated with one
VLAN at a time. However, the VLAN association can be
changed.
groupid
•
automatically generated when you create a protocol-
based VLAN group with the vlan protocol group
command. To see the group ID associated with the name
of a protocol group, use the show port protocol all
command.
vlanid
•
Exit to Privileged EXEC mode.
Display the Protocol-Based VLAN information for either
the entire system or for the indicated group.
groupid
— The protocol-based VLAN group ID.
— Specific interface type and number, such as
— The protocol-based VLAN group ID.
— The protocol-based VLAN group ID, which is
— A valid VLAN ID.
. You can add individual