Configuring An Ipv6 Acl - Dell Networking N4000 Series Configuration Manual

Configuring an IPv6 ACL

Beginning in Privileged EXEC mode, use the following commands to create
an IPv6 ACL, configure rules for the ACL, and bind the ACL to an interface.
Command
configure
name
ipv6 traffic-filter
Purpose
Enter global configuration mode.
Create an extended IPv6 ACL. This command also enters
IPv6 Access List Configuration mode. If an IPv6 ACL with
this name already exists, this command enters the mode to
update the existing ACL.
Configuring Access Control Lists
623