Dell Networking N4000 Series Configuration Manual page 819

4 In the Bridge Multicast Group tables, assign a setting by clicking in the
Static row for a specific port/LAG. Each click toggles between S, F, and
blank. (not a member).
5 Click Apply.
The bridge multicast address is assigned to the multicast group,
ports/LAGs are assigned to the group (with the Current rows being
updated with the Static settings), and the switch is updated.
Removing a Bridge Multicast Group
To delete a bridge multicast group:
1 Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply.
The selected bridge multicast group is removed, and the device is updated.
Configuring L2 Multicast Features
819