Dot1Ag Ping And Traceroute - Dell Networking N4000 Series Configuration Manual

Dot1ag Ping and Traceroute

Beginning in Privileged Exec mode, use the following commands to help
identify and troubleshoot Ethernet CFM settings.
CLI Command
ping ethernet cfm mac
addr
ping ethernet cfm
mep-id
remote–mpid
traceroute ethernet cfm mac
mac-addr
traceroute ethernet cfm
mep-id
remote–mpid
show ethernet cfm
traceroute–cache
Description
mac-
Generate a loopback message from the MEP with
the specified MAC address.
Generate a loopback message from the MEP with
the specified MEP ID.
Generate a Link Trace message from the MEP with
the specified MAC address.
Generate a Link Trace message from the MEP with
the specified MEP ID.
Show the link trace database.
Configuring Connectivity Fault Management
875