Figure 21-28. VLAN Membership - VLAN 200
3 Click Apply.
4 Assign ports 2–15 and LAG1 to the Payroll VLAN.
From the Switching → VLAN → VLAN Membership page, select
a
400-Payroll from the Show VLAN field.
In the Static row, click the space for ports 2–15 and LAG 1 so the U
b
(untagged) displays for each port, and then click Apply.
5. Configure LAG 1 to be in general mode and specify that the LAG will
accept tagged or untagged frames, but that untagged frames will be
transmitted tagged with PVID 400.
From the Switching → VLAN → LAG Settings page, make sure Po1
a.
is selected.
Configure the following settings:
b.
•
Port VLAN Mode — General
•
PVID — 400
•
Frame Type — AdmitAll
Click Apply.
c.
702
Configuring VLANs