Adding A Protocol Group - Dell Networking N4000 Series Configuration Manual

Adding a Protocol Group

To add a protocol group:
1 Open the Protocol Group page.
2 Click Add to display the Add Protocol Group page.
3 Create a name for the group and associate a VLAN with the group.
Figure 21-19. Add Protocol Group
4 Click Apply.
5 Click Protocol Group to return to the main Protocol Group page.
6 From the Group ID field, select the group to configure.
7 In the Protocol Settings table, select the protocol and interfaces to
associate with the protocol-based VLAN.
In Figure 21-20, the Protocol Group 1 (named IPX) is associated with the
IPX protocol and ports 14–16. Ports 20-22 are selected in Available Ports
list. After clicking the right arrow, they will be added to the Selected Ports
list.
676
Configuring VLANs