Default Link Aggregation Values - Dell Networking N4000 Series Configuration Manual

• The port cannot be a mirrored port
The following are the interface restrictions
• The configured speed of a LAG member cannot be changed.
• An interface can be a member of only one LAG.

Default Link Aggregation Values

The LAGs on the switch are created by default, but no ports are members.
Table 28-1 summarizes the default values for the MAC address table.
Table 28-1. MAC Address Table Defaults
Parameter
LACP system priority
LACP port priority
LACP timeout
LAG hash algorithm type
Default Value
1
1
Long
Enhanced (7)
Configuring Link Aggregation
917