Dell Networking N4000 Series Configuration Manual page 472

Command
iscsi cos {enable | disable |
vtp dscp
vtp | dscp
iscsi aging time
exit
show iscsi
show iscsi sessions
472
Configuring iSCSI Optimization
Purpose
Optionally set the quality of service profile that will
[remark] be applied to iSCSI flows.
• enable—Enables application of preferential QoS
treatment to iSCSI frames. On switches that
support DCBX, this also enables the generation of
the Application Priority TLV for iSCSI.
• disable—Disables application of preferential QoS
treatment to iSCSI frames.
• vpt/dscp—The VLAN Priority Tag or DSCP value to
assign received iSCSI session packets.
• remark—Mark the iSCSI frames with the configured
DSCP value when egressing the switch.
time
Optionally set aging time (range: 1–43,200 seconds)
for iSCSI connections. When all connections
associated with a session are aged out, the session is
deleted.
Exit to Privilege Exec mode.
Display iSCSI settings.
Display iSCSI session information. Redundant
(MPIO paths) may not be accounted for in the iSCSI
sessions table if a separate iSCSI login is not issued
during establishment of the session.