Dell Networking N4000 Series Configuration Manual page 288

Initiating a Telnet Session from the Web Interface
NOTE:
The Telnet client feature does not work with Microsoft Windows Internet
Explorer 7 and later versions. Initiating this feature from any browser running on
a Linux operating system is not supported.
To launch a Telnet session:
1 From the System → General → System Information page, click the
Telnet link.
2 Click the Telnet button.
Figure 12-2. Telnet
3 Select the Telnet client, and click OK.
Figure 12-3. Select Telnet Client
288
Managing General System Settings