Dell Networking N4000 Series Configuration Manual page 687

Command
switchport general pvid
vlan-id
switchport general
acceptable-frame-type
tagged-only
switchport general
ingress-filtering disable
CTRL + Z
show interfaces
interface
switchport
Purpose
(Optional) Set the port VLAN ID. Untagged traffic that
enters the switch through this port is tagged with the
PVID.
vlan-id
— PVID. The selected PVID assignment must be
to an existing VLAN. (Range: 1–4093). Entering a PVID
value does not remove the previous PVID value from the
list of allowed VLANs.
(Optional) Specifies that the port will only accept tagged
frames. Untagged frames are dropped
(Optional) Turn off ingress filtering so that all received
tagged frames are forwarded whether or not the port is a
member of the VLAN in the tag.
Exit to Privileged EXEC mode.
Display information about the VLAN settings configured
for the specified interface. The
the interface type and number.
at ingress.
interface
variable includes
Configuring VLANs
687