Address Pool Options - Dell Networking N4000 Series Configuration Manual

Address Pool Options

Use the Address Pool Options page to view manually configured options. You
can define options when you create an address pool, or you can add options to
an existing address pool.
To display the Address Pool Options page, click Routing → IP → DHCP
Server → Address Pool Options in the navigation panel.
Figure 32-8. Address Pool Options
Defining DHCP Options
To configure DHCP options:
1 Open the Address Pool page.
2 Select the Add Options check box.
3 Select the check box that corresponds to the value type (ASCII,
Hexadecimal, or IP address).
4 Specify the value(s) in the corresponding field.
Figure 32-9 shows an example of adding the SMTP server IP address. The
option code for the SMTP server is 69, and the IP address of the SMTP
server is 192.168.10.15.
Configuring DHCP Server and Relay Settings
1049