Dell Networking N4000 Series Configuration Manual page 684

automatically configured as a member of all VLANs. You can remove them
from membership in specific VLANs. By default, the native VLAN for a trunk
port is VLAN 1.
Command
configure
interface
interface
switchport mode trunk
684
Configuring VLANs
Purpose
Enter global configuration mode.
Enter interface configuration mode for the specified
interface
interface. The
and number, for example tengigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
Configure the interface as a tagged layer 2 VLAN interface.
variable includes the interface type