Dell Networking N4000 Series Configuration Manual page 530

10 View 802.1X information about Port 8.
console#show dot1x interface Gi1/0/8
Administrative Mode............... Enabled
Dynamic VLAN Creation Mode........ Enabled
Monitor Mode...................... Disabled
Port
-------
Gi1/0/8
Quiet Period................................... 60
Transmit Period................................ 30
Maximum Requests............................... 2
Max Users...................................... 2
VLAN Assigned.................................. 1 (Default)
Supplicant Timeout............................. 30
Guest-vlan Timeout............................. 90
Server Timeout (secs).......................... 30
MAB mode (configured).......................... Disabled
MAB mode (operational)......................... Disabled
Controlling Authentication-Based VLAN Assignment
The network in this example uses three VLANs to control access to network
resources. When a client connects to the network, it is assigned to a particular
VLAN based on one of the following events:
• It attempts to contact the 802.1X server and is authenticated.
• It attempts to contact the 802.1X server and fails to authenticate.
• It does not attempt to contact the 802.1X server.
The following table describes the three VLANs:
VLAN ID VLAN Name
100 Authorized
200 Unauthorized
300 Guest
530
Configuring Port and System Security
Admin
Mode
---------------- ------------
mac-based
VLAN Purpose
Data from authorized clients
Data traffic from clients that fail the authentication
with the RADIUS server
Data traffic from clients that do not attempt to
authenticate with the RADIUS server
Oper Reauth
Mode Control
--------
Authorized FALSE
Reauth
Period
----------
3600