Dell Networking N4000 Series Configuration Manual page 1083

Command
ip-address
show ip route [
mask prefix-length
[ |
[longer-prefixes] |
protocol
]
show ip route configured View the configured routes, whether they are reachable or
show ip route summary
show ip protocols
show ip route preferences View detailed information about the route preferences.
Purpose
View the routing table.
]
ip-address
•
is to be displayed and displays the best matching best-
route for the address.
mask
• — Subnet mask of the IP address.
prefix-length
•
preceded with a forward slash ('/'). (Range: 0-32 bits)
• longer-prefixes — Indicates that the
subnet-mask
displays the routes to the addresses that match that
prefix.
protocol
• — Specifies the protocol that installed the
routes. (Range: connected, ospf, rip, static)
not.
View summary information about the routing table.
View the parameters and current state of the active
routing protocols.
— Specifies the network for which the route
— Length of prefix, in bits. Must be
pair becomes the prefix, and the command
Configuring IP Routing
ip-address
and
1083