Dell Networking N4000 Series Configuration Manual page 818

Table 25-2 contains definitions for port/LAG IGMP management settings.
Table 25-2. Port/LAG IGMP Management Settings
Port Control
D
S
F
Blank
Adding and Configuring Bridge Multicast Address Groups
To configure a bridge multicast group:
1 From the Bridge Multicast Group page, click Add.
The Add Bridge Multicast Group page displays.
Figure 25-3. Add Bridge Multicast Group
2 Select the ID of the VLAN to add to the multicast group or to modify
membership for an existing group.
3 For a new group, specify the multicast group IP or MAC address associated
with the selected VLAN.
818
Configuring L2 Multicast Features
Definition
Dynamic: Indicates that the port/LAG was dynamically joined to
the Multicast group (displays in the
Static: Attaches the port to the Multicast group as a static member
Static
in the row. Displays in the
Forbidden: Indicates that the port/LAG is forbidden entry into the
Multicast group in the
Apply is clicked.
Blank: Indicates that the port is not attached to a Multicast group.
Current
Current
Static
row. Displays in the
row).
row once Apply is clicked.
Current
row once