Dell Networking N4000 Series Configuration Manual page 1076

Figure 33-10. Router Route Entry and Preference Configuration
2 Next to Route Type, use the drop-down box to add a Default, Static, or
Static Reject route.
The fields to configure are different for each route type.
Default — Enter the default gateway address in the Next Hop IP
•
Address field.
• Static — Enter values for Network Address, Subnet Mask, Next Hop
IP Address, and Preference.
• Static Reject — Enter values for Network Address, Subnet Mask, and
Preference.
3 Click Apply.
The new route is added to the routing table.
1076
Configuring IP Routing