Default Port-Based Traffic Control Values - Dell Networking N4000 Series Configuration Manual

Access Control Lists (ACLs) and LLPF can exist on the same interface.
However, the ACL rules override the LLPF rules when there is a conflict.
Similarly, DiffServ and LLPF can both be enabled on an interface, but
DiffServ rules override LLPF rules when there is a conflict.
If Industry Standard Discovery Protocol (ISDP) is enabled on an interface,
and the LLPF feature on an interface is enabled and configured to drop ISDP
PDUs, the ISDP configuration overrides the LLPF configuration, and the
ISDP PDUs are allowed on the interface.

Default Port-Based Traffic Control Values

Table 24-2 lists the default values for the port-based traffic control features
that this chapter describes.
Table 24-2. Default Port-Based Traffic Control Values
Feature
Flow control
Storm control
Protected ports
LLPF
790
Configuring Port-Based Traffic Control
Default
Enabled
Disabled
None
No protocols are blocked