Dot1Ag Mip Configuration - Dell Networking N4000 Series Configuration Manual

To add a MEP, click the Add link at the top of the page. A VLAN must be
associated with the selected domain before you configure a MEP to be used
within an MA (see the MA Configuration page).

Dot1ag MIP Configuration

Use the MIP Configuration page to define a switch port as an intermediate
bridge for a selected domain.
To display the page, click Switching → Dot1ag → MIP Configuration in the
tree view.
Figure 26-8. Dot1ag MIP Configuration
868
Configuring Connectivity Fault Management