Chapter
4
Web Page Download
Web Page Download
NOTE: This download method requires firmware with the .prg extension
1. Make sure the printer is powered up, in ONLINE mode, and that the
Ethernet cable is connected.
2. Get the IP address from the front panel (under Network Setup in the
menus).
3. Enter the printer's IP address in your browser (e.g., http://10.224.5.21).
4. When prompted for a user name and password, enter "root" for user
name and click OK.
5. Click "System" in the Configuration box.
6. Click the "Upgrade" button.
196
FILENAME.prg.
Figure 19. System Configuration Upgrade