Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
IPDS Emulation
NOTE: When Early Print Complete is enabled and an error occurs,
Graphics Scaling
This parameter chooses the scaling factor for graphics when the
Mappin. Control option of the IPDS Write Graphics Control
command is SCALE TO FIT:
•
Rounded. Calculations are rounded up in the desired output
resolution.
•
Exact. Graphics will be scaled as accurate as possible.
Graphic CharSize
This parameter will emulate the graphic character size of the
selected printer model.
•
•
I-2/5 Checksum
This parameter defines the printer checksum calculation method for
Interleaved 2 of 5 barcodes.
•
Standard (3/1). The odd numbers will be multiplied by 3 and
the even numbers by 1 for calculation of the checksum.
•
Special (4/9). The odd numbers will be multiplied by 4 and the
even numbers by 9 for calculation of the checksum.
NOTE: "Odd" refers to the 1st, 3rd, 5th... character in the barcode,
Default Code Page
Choose which code page to use with the IPDS emulation. This
option is independent of the Character Set selection in the CTHI
emulation.
186
you may lose data.
4234. IBM 4234
67XX. Decision Data 67XX
while "even" refers to the 2nd, 4th, 6th... character in the
barcode.