Match Colors In Multiple Screens; Use The Color Saturation Menu For Color Match; Remote Control Of The Projector; Alarm Conditions - Christie J Series User Manual

Section 3: Operation

3.13.4Use the Color Saturation Menu for Color Match

To use the Color Saturation menu to
match colors across multiple screens. In
the three Color Adjustment submenus
(Red, Green, Blue, and White), set all
main values to 1000 and the secondary
values to 0, if applicable. Then judge by
eye and adjust the slide bars as needed.
NOTE: Adjustments here define new x/y
coordinates in the Color Adjustments by
X,Y menu. For best results, use this menu
after doing the color adjustment
procedure.

3.14 Remote Control of the Projector

As an alternative to using a keypad, most projector functions can be controlled remotely, typically at a
controller such as a PC, via a web interface.
• Via ASCII Messaging: Connect a serial link between your controller and the RS-232 or RS-422 port
(recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector
address. Valid ASCII codes and messages are documented in the Christie Serial Communications document
available at the Christie website.
• Via Web Interface: Connect the PC to the projector's Ethernet port. In the web browser (i.e., Internet
Explorer), enter the IP address of the projector you wish to control. This will prompt a login screen. The
default login ids are: admin, service, and guest. Up to a maximum of 3 users can connect at any given time.
Two users can use the same account to log in. Each user will see a different set of tabs. The default passwords
can be edited by an administrator or a service user in the Admin tab. Guest users will not see this tab. Basic
operations of the projector can be controlled from this interface and the Virtual OSD can be accessed from
here.

3.15 Alarm Conditions

An alarm condition consists of a
message that is on the LCD display
located beside the built-in keypad.
There are two types of alarm conditions:
• Warning Alarm
• Critical Alarm
3-56
Color Saturation
Select Color Adjustment
1.
Red Part of Red
2.
Green Part of Red
3.
Blue Part of Red
4.
Green Part of Green
5.
Red Part of Green
6.
Blue Part of Green
7.
Blue Part of Blue
8.
Red Part of Blue
9.
Green Part of Blue
10.
Red Part of White
11.
Green Part of White
12.
Blue Part of White
13
Color Purity Filter
14.
Auto Color Enable
15.
Color Enable
16.
Copy From
17.
Lamp
18..
User 2
1000
0
0
1000
0
0
1000
0
0
1000
1000
1000
White
Max Drives
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)