Christie J Series User Manual page 72

Section 3: Operation
To Copy A Channel: Highlight the desired channel in the Channel Setup menu, then press E
Select Channel Operation submenu. Select "Copy" and press E
identical to original, which still remains, but it is identified with the next available number from 01-99. If you
change your mind and do not want to copy the current channel, press E
menu. Copying channels is a quick method for creating numerous channels, each of which can then be edited
and adjusted for a variety of presentations in the future.
Channel Setup
1. 1,2 iSVid
2. 4,1 pDig
To Delete A Channel: Highlight the desired channel in the Channel Setup menu, then press E
the Select Channel Operation submenu. Select Delete and press E
deletion of this channel.
Channel Setup
1. 1,2 iSVid
2. 4,1 pDig
To Delete Multiple Channels: Highlight any channel in the Channel Setup menu and press E
the Select Channel Operation submenu. Select Delete Unlocked Only and press E
unlocked channels. Select Delete All Channels to delete all channels, even those that are locked. In either
case, the current channel will remain but will be redefined from projector defaults.
NOTE: For any deletion, a window will appear to confirm the deletion of the desired channel. Select C
(default) if you don't want to delete after all.
3-16
Enter
15.73kHz- i59.94-Hz-
33.72kHz+ p29.07-Hz+
Select Channel Operation
F
IGURE
Enter
15.73kHz- i59.94-Hz-
33.72kHz+ p29.07-Hz+
Select Channel Operation
F
IGURE
NTER
Edit
Copy
Delete
Delete Unlocked Only
Delete All Channels
New Channel identical
to Chan #1.
3-6 C A C
OPY HANNEL
NTER
Edit
Copy
Delete
Delete Unlocked Only
Delete All Channels
(default)
3-7 D C
ELETE A HANNEL
; a new channel will be created. It is
XIT
to cancel and return to the previous
Channel Setup
1. 1,2 iSVid 15.73kHz-
2. 4,1 pDig 33.72kHz+
3. 1,2 iSVid 15.73kHz-
; a window will appear to confirm the
Do you wish to delete this channel setup?
Delete Channel Setup
Cancel
NTER
to delete all
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)
NTER
to go to the
i59.94-Hz-
p29.07-Hz+
i59.94-Hz-
NTER
to activate
NTER
to go to
ANCEL