Section 4: Web User Interface
Add a Function Key Event
1. Click Add to open the RTE Wizard.
2. Select the Function Key Event tab.
3. Select a Function key from the drop-down list as
shown. See
information.
Add a DMX Channel Event
1. Click Add to open the RTE Wizard.
2. Select the DMX Channel Event tab.
3. Select a DMX channel (DMX-56 to DMX-61)
from the drop-down list as shown in Figure. See
Section 3 Operation
Add a Serial Command
1. Enter a serial command in the Serial Command
field.
NOTE: For serial commands see the J Series
Serial Commands Technical Reference
Information P/N 020-100224-XX, available at the
Christie Website.
2. Click Send to add the serial command.
About Tabbed Page
Provides information about the projector software version, model, serial number, and license information.
NOTE: The information provided on the Version and License tabs are read-only.
4-12
Section 3 Operation
for detailed
for detailed information.
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)