Navigate The Web User Interface; Help Text - Christie J Series User Manual

Section 4: Web User Interface
The following table describes each area found in the Main window.
A
Secondary Tabs (specific to a
primary tab) located along the
bottom of the Main window.
D
Primary Tabs located along the
top of the Main window.
G
Status Indicator displays the
overall status of the projector,
based on the 12 categories of
information available.
NOTE: Click the Status
Indicator LED to display the
Status window and obtain more
information about any current
errors and warnings. See
Main Tabbed Page -
J
Shutter section contains an Open
and Close button. Only one is
enabled depending on the
current state of the projector's
shutter.
4.2

Navigate the Web User Interface

It is not recommended that you use the web browser navigation functionality (i.e. the Back and Forward
functions) as this will cause you to lose your web connection. It is recommended that you navigate using the
application interface and related functionality detailed in this section.
IMPORTANT: Internet Explorer V6.0 has known performance issues and is not recommended to be used as
the primary web browser for the web user interface. It is recommended that you use Internet Explorer V7.0.

4.2.1 Help Text

You can move your mouse pointer over most buttons or fields
to display related help information or click the Help button, if
available. To disable this feature, go to:
Admin > System > Tooltip: Hide.
NOTE: Help text is not available for a disabled button.
4-2
B
Active Input Window section is
read-only.
E
Current Status Bar provides
information messages according
to the current status of the
projector.
H
Logout Button (located at the top
right corner of the web browser)
is used to logout you off of the
web user interface and the
projector.
4.2.4
Status.
K
OSD (On Screen Display)
section contains an On and Off
button. Only one is enabled
depending on the current state of
the projector's on-screen display.
C
These sections provide drop-
down list selections (see
3 Operation for more details).
F
Projector Information section is
read-only.
I
Power section contains an On
and Off button. Only one is
enabled depending on the
current powered state of the
projector.
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)
Section