Matching Colors Across Multiple Screens - Christie M Series User Manual

Hide thumbs Also See for M Series:

Table of Contents

For speed, enable Auto Color Enable. Each color coordinate selected automatically

triggers a full field display of the corresponding color.

Alternatively, use the Color Saturation menu for these adjustments or to fine tune.

These coordinate adjustments move the three color points closer together to establish a

shared gamut attainable by all projectors in your group. Adjust only as necessary to ensure

that the resulting color palette is as large as possible. When done, lamp power may need to be

adjusted.

All screens should now be color-matched. Apply the new user gamut to a source at any time

by selecting it in the Select Color Adjustment list accessed in the Advanced Image Settings

menu.

Matching colors across multiple screens

In a multiple-projector wall, precisely match color and intensity from image-to-image so that the full

wall is as uniform as possible.

1. In the three Color Adjustment submenus (Red, Green, Blue, and White), set all main values to

1000 and the secondary values to 0, if applicable.

2. Adjust the slide bars as needed.

Adjustments here define new x/y coordinates in the Color Adjustments by X,Y menu. For best

results, use this menu after doing the color adjustment procedure.

M Series User Guide

020-101948-02 Rev. 1 (08-2018)

Using multiple projectors

Table of Contents