Edit Text - Christie J Series User Manual

"Direct" Slide Bars: For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the
menu system. Press Gamma, Brightness, or Contrast to display the contrast slide bar.
Use the arrow keys to adjust a direct slide bar, or press E
then E or L
NTER
E
XIT
to save and return to your presentation.
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu
Preferences menu) — the slide bar just won't be visible. 2) A direct slide bar disappears if it is not used within
five seconds.
Check Boxes: Conditions are present if its adjacent check box
contains a check mark. To toggle the check box, highlight and press
E , or highlight and use R
NTER
A K
RROW EY
to clear. If a check box is numbered, enter its number
to immediately toggle the check box.
Pull-Down Lists: To see a pull-down list of options available for a given parameter:
• Highlight the list and press E
-OR-
• Enter the menu option number
Use the U A
P RROW
choose an option from the list.
1. Serial (RS-232 IN) Options
2. Serial (RS-232 OUT) Options
3. Serial (RS-422) Options
Projector Address
4.
5. Network Routing
6. Ethernet Settings
7. Broadcast Key
8. Front IR Enable
9. Back IR Enable
10. Wired Keypad Enable
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use L
A K or R
RROW EY
NOTES: 1) Press L
down list. 2) Press E

3.2.5 Edit Text

Activate the Edit Window: To enter or edit text, highlight the desired parameter (such as a channel name) and
press E
NTER
to activate its adjacent edit window. Any previously entered text is displayed with its first
character highlighted in a square cursor, signifying that this character is ready for editing.
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)
A K or R
EFT RROW EY IGHT
A
IGHT RROW
NTER
K or D A
EY OWN RROW
Communications
Separate
A K . Press E
IGHT RROW EY
A K or R
EFT RROW EY
XIT
while in a pull-down list to cancel any change.
NTER
and enter a specific number from the keypad,
A K to save (or E
RROW EY
K to check and L
EY EFT
K to navigate up and down within the list. Press E
EY
NTER
when the desired choice appears.
A K
IGHT RROW EY
to jump between pages in an extra long pull-
Section 3: Operation
XIT
to cancel). When you are done, press
Edge Blending
1. Blending Enable
1. Separate
2. RS-232 and RS-422 Joined
3. RS-232 and Ethernet Joined
4. All Joined
NTER
to
EFT
3-11