User Manual Network Supported Refer to the User Manuals below for details about network function. □ Network Set-up and Operation □ PJ Network Manager...
“Network Set-up and Operation.” Note: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Operating with Remote Control Dimensions Keystone Correction Pointer Function Wireless Mouse Operation Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
READ AND KEEP THIS OWNER’S MANUAL FOR Please, dispose of them correctly at your local LATER USE. community waste collection/recycling centre. Please, help us to conserve the environment we live in! LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Never spill liquid of any kind on the projector. Do not install the projector near the ventilation duct of air- conditioning equipment. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Damages to the projector caused by using an uncleaned filter or improper maintenance will void the Air flow warranty on the projector. Top Panel Fig. 1 Filter replacement icon Fig. 2 Filter cartridge WARNING FILTER replacement icon indicator LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Do not hold the lens and the peripheral part. followings when using the projector. ● Do not touch the lens while it is moving as this could cause injury to the fingers. ● Never allow children to touch the lens. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Model Number ... : LX505, LX605 Trade Name ....: Christie Responsible party ..: CHRISTIE DIGITAL SYSTEMS, Inc. Address ...... : 10550 Camden Drive Cypress, CA 90630 U.S.A. AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
Power Cord Connector Rear Cover (Optional Parts Attachment) Hand Grip Security Chain Hook Note: This is not a handle for carrying the projector. Do not carry the projector with this hook. Bottom Adjustable Feet LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.19-21). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Light orange when the projection lamp reaches its end of life (pp.66, 77). POWER indicator – Light green while the projector is in stand-by mode. – Light green during operations. – Blink green in the Power management mode (p.57). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
– Pan the image in Digital zoom + mode (p.43). materials. – Adjust the volume level (with Point buttons) ◄► or mute the sound (with Point button.) (p.28). ▼ LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Page 16
“ON”. Set it to “ALL OFF” for power saving when it is not in use. Slide this switch to “RESET” to initialize the remote control code. FILTER button Scroll the filter (p.30). LENS SHIFT button Select the Lens Shift function (p.29). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
(16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately). Connected with the remote control cable, the remote control does not emit wireless signal. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 31, 44, 50). Adjustable Feet LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
10% width of the display. Shift range Lens shift center position When the lens is shifted to rightmost. When the lens is shifted to leftmost. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
● Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector. ● For details of the lens and installation, contact the sales dealer where you purchased the projector. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
DIGITAL IN Unplug the power cords of both the projector See the next page for the signals that can output to the ANALOG OUT terminal. and external equipment from the AC outlet before connecting cables. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Refer to the Analog Out Signal Table (above). S-video Scart-VGA DVI-Digital cable cable cable cable cable Video Video Y - Pb/Cb - Pr/Cr Y - Pb/Cb - Pr/Cr ANALOG OUT S-VIDEO ANALOG IN DIGITAL IN LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
(stereo) (stereo) Audio cable (stereo) (R) (L) AUDIO IN 1/2 AUDIO OUT (stereo) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Projector side AC Outlet side For the U.S.A. and Canada For Continental Europe Ground To POWER CORD CONNECTOR on your To the AC Outlet. To the AC Outlet. projector. (200–240 V AC) (120 V AC) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
) will turn red for a moment. Enter the correct PIN code all • The "1234" is set as the initial PIN code at the factory. over again. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
POWER indicator turned off. You can THE LAMP LIFE. turn it on again after the POWER indicator becomes green again. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO. (p.29). Network See the owner’s manual of “Network Set-up and Operation”. Guide The key operation is displayed. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
(p.12) • The projector will shut down automatically when the set time on shutter management has passed. (p.61) • The Power management function does not work when the shutter is closed. (p.57) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
+/– buttons again to turn the sound back on. Volume Built-in SP Mute Note: Sound function can not be operated via the remote control or the Screen Menu, when Nework is selected in Input Menu. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
30 Min Key lock Network Note: • The H-sync freq. and V-sync freq. values described in the figure may be different from the actual values. • SERIAL NO. is used to service the projector. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Page 32
Note: • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Press the SELECT button Keystone Keystone Press the Point ► Keystion button Reduce the bottom left corner Reduce the bottom right corner part with the Point buttons. part with the Point buttons. ◄▲ ►▲ LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
USB cable. L-CLICK button Acts as left (click) mouse button while the projector and a computer are connected with a USB cable. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Y,Pb/Cb,Pr/Cr Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks: When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Video VIDEO jack, select Video. When the video input signal is connected to the Y,Pb/Cb,Pr/Cr Y-Pb/Cb-Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr . When the video input signal is connected to the S-video S-VIDEO jack, select S-video. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Use the Point ▲▼ buttons to select Systerm and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired system and then press the SELECT button. Systems in this dialog box can be selected. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
DVI terminal and 480p, 575p, 480i, 575i, 720p, 1035i, 1080i or 1080p is selected on the PC SYSTEM Menu. • Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Display area H Use the Point ◄► buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point ◄► buttons to adjusts the vertical area displayed by this projector. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
480p, 575p, 720p, 1035i or 1080i is selected in the PC store the data. System Menu (p.36). • When input computer signal to the projector, PC adjust function will become available. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
When White balance Red, Green or Blue is adjusted, Color temp. will change to adj.. Gamma Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode. • True, Full and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.36) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 33-35) again or adjust the screen size with the D.ZOOM button. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
This function is used to project the image from rear of the screen. Reset This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
480i, 575i, System Auto 480p, 575p, 720p, 1035i, 1080i, and 1080p. Y, Pb/Cb, Pr/Cr 1080p 1080i 1035i 720p 575p Note: 480p 575i The AV System Menu cannot be selected when selecting 480i RGB (Scart). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• Noise reduction and Progressive cannot be selected when 480p, 575p or 720p is selected (p.45). A confirmation box • Noise reduction cannot be selected when 1080p is selected appears and then (p.45). select Yes. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• The adjustable range for Scale H/V and Position H/V are limited depending on the input signal. • Wide cannot be operated when 720p, 1035i, 1080i or 1080p is selected on AV System Menu (p.45). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Rear Reset This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND- BY or MENU button is pressed during Input search is in progress, Input search will stop and go back to the previous input signal. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Capture and Logo PIN code change cannot be selected. Logo select This function decides on the starting-up display from among following options. User ..Show the image you captured. Default ..Show the factory-set logo. Off ..... Show the countdown display only. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to "4321" at the factory. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 84, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Then the projector will turn off after 3 minutes. Lamp replacement icon The Lamp replacement icon will not appear when the Display function is set to Off (p.52), during "Freeze" (p.30), or "Shutter" (p.27). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Page 58
In that case, switch the code on the remote control to fit the code on the projector. • If the batteries are removed from the remote control for a long period of time, the remote control code will be reset. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Refer to the owner’s manual of “Network Set-up and Operation”. Note: • Factory default is Network. • When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
30 Min Start Stop or Cancel the P-timer via Remote Control Reset To stop the P-timer, press the P-TIMER button. Exit To cancel the P-timer, press and hold the P-TIMER button for a few seconds. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
The "1234" is set as the initial PIN code at the factory. If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 84, AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
-When Video delay control function is set to Low or High and press the KEYSTION button on the remote control, Fig.1 will be dispalyed on the Video delay : On bottom left screen. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• Fig.1, Fig. 2, Fig. 3 and Fig. 4 will not appear when PIN code lock, Logo PIN code lock, Lamp counter, and Filter the Display function is set to Off (p.52) or during counter to the factory default settings. “Freeze” (p.30). LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
• Do not use the filter cartridge with other projector. The filter counter and the scroll counter do not recognize the correct number of remaining scrolls of the used filter cartridge and the reset function cannot work properly. It may cause a breakdown. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. Model No. of your projector ● LX505, LX605 Replacement Filter Cartridge Type No. ● 003-003084-01 (Service Parts No. 610 346 9034) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Another confirmation dialog box appears, select Yes to reset the Scroll counter. Scroll counter Reset? Scroll counter Reset? appears. Select Yes, then another confirmation box appears. Select Yes again to reset the Scroll counter. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
The inside of the same type. Do not drop the lamp or touch the glass projector can become very hot. bulb! The glass can shatter and may cause injury. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. Model No. of your projector LX505, LX605 ● Replacement Lamp Type No. 003-120531-01 (For LX505) ● (Service Parts No. 610 347 5158) 003-120507-01 (For LX605) (Service Parts No. 610 346 9607) LX505/LX605 User Manual...
AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also by the cold air. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
LAMP indicator lights on and other indicators blink. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
– Make sure the temperature is not out of Operating Temperature (41˚F–104˚F [5˚C– 40˚C]). – End of lamp life is approaching. Replace the lamp with a new one promptly. (See page 66) appears on the screen LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
– Is the image projected? You will hear the sound only when the image is projected. Is the image projected? You will hear the sound only when the image is projected. – Check the Build-in SP function. (See page 28) (See page 28) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Display area - V Red/Green/Blue Offset Reset Yes/No 0–31 Sharpness Mode free Gamma 0–15 Store Mode 1 Reset Yes/No Store Image 1 Mode 10 Quit Image 10 Note: The Menu display varies depending on the input signal. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Noise reduction H / V Common Off/On/Film Progressive Reset Reset Yes/No Store Image 1 Keystone Store Reset Ceiling On/Off Image 10 Rear On/Off Reset Note: The Menu display varies depending on the input signal. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.65). LAMP REPLACE When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights orange, replace the projection lamp with a new one promptly. (p.66) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
The shutter is out of control. (The projector is in the cooling mode.) The shutter is out of control. (The projector is in the stand-by mode.) In that case, contact the service station immediately. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
European means the product is Listed by Community (EC). Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty, and electrical hazards. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
4.3' (1.3m) - 75.1'(22.9m) Projection Lens F1.74–2.37 lens with f=26.85 mm–45.43 mm with motor zoom and focus Projection Lamp LX605:330 W NSHA lamp LX505:275 W NSHA lamp Interface Input 1 Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1 Input 2...
For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
RX – + Data Ground RX + ----- ----- ----- 8 7 6 5 4 3 2 1 CONTROL PORT CONNECTOR (D-sub 9 pin) Serial ----- R X D T X D ----- ----- ----- LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code. LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 16.39(416.2) 3.80(96.6) 4.34(110.3) 19.27(489.5) 7.70(195.5) 6.89(175.0) 6.25(158.8) 5.91(150.0) 3.78(96.0) 6.46(164.0) LX505/LX605 User Manual 002-000232-01 Rev.1 (12-2009)
Page 88
Americas Canada Chile Christie Digital Systems USA, Inc. Christie Digital Systems Canada, Inc. Representative Office 10550 Camden Drive 809 Wellington St. N. Christie Digital Systems USA, Inc. Cypress CA 90630 Kitchener, Ontario N2G 4Y7 Av. Pedro Fontova 7619 of 60...