Christie J Series User Manual page 111

4. In each projector, select a "User" color adjustment (1-4) to enable Color Adjustments by X,Y changes. Then
enter your recorded x/y values into each menu.
Color Adjustments by X,Y
1. Select Color Adjustment
2. Color Temperature
3. Red X
4. Red Y
5. Green X
6.
Green Y
7.
Blue X
8.
Blue Y
9. White X
10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
13. Color Enable
14. Copy From
5. In each projector, judge by eye and adjust x/y coordinates slightly in the following manner:
• To match reds, decrease "Red X" until full
field red screens match.
• To match greens, decrease "Green Y" until full
field green screens match.
• To match blues, increase both "Blue X" and
"Blue Y" until full field blue screens match.
NOTE: For speed, enable the "Auto Color
Enable" check box. Each color coordinate you
select will then automatically trigger a full
field display of the corresponding color.
Alternatively, use the Color Saturation menu for
these adjustments or to fine tune.
These coordinate adjustments move the three color points closer together (see below) to establish a "shared"
gamut attainable by all projectors in your group. Adjust only as necessary to ensure that the resulting color
palette is as large as possible. When done, you may need to adjust lamp power slightly.
6. All screens should now be color-matched. Apply this new "User" gamut to a source at any time by
selecting it in the "Select Color Adjustment" list accessed in the Advanced Image Settings menu.
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)
Color Adjustments by X,Y
User 2 1. Select Color Adjustment
6521 2. Color Temperature
0.655 3. Red X
0.341 4. Red Y
0.332 5. Green X
6.
0.575 Green Y
0.144 7.
Blue X
0.093 8.
Blue Y
0.320 9. White X
0.330 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
Color Adjustments by X,Y
User 2 1. Select Color Adjustment
6521 2. Color Temperature
0.640 3. Red X
0.350 4. Red Y
0.329 5. Green X
6.
0.560 Green Y
0.129 7.
Blue X
0.100 8.
Blue Y
0.374 9. White X
0.367 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
Color Adjustments by X,Y
1. Select Color Adjustment User 2
2. Color Temperature 6521
3. Red X 0.655
4. Red Y 0.341
5. Green X 0.332
6. Green Y 0.575
7. Blue X 0.144
8. Blue Y 0.093
9. White X 0.320
10. White Y 0.330
11. Yellow Notch Filter
12. Auto Color Enable
13. Red
Color Enable
14. Copy From Max Drives
Section 3: Operation
User 2
6521
0.626
0.350
0.331
0.528
0.133
0.106
0.323
0.359
Red
Max Drives
Reduce Red X
Reduce Green Y
Increase Blue X
and Y
3-55