Size And Position Menu; Resize Presets - Christie J Series User Manual

3.5

Size and Position Menu

Increase or decrease the size of your image, change
its proportion (aspect ratio), move the image to a
specific area of the screen, and refine other related
parameters. Use Size and Position controls to match
the image precisely to the screen used at the site.
See 3.2.4 How to Use Slide Bars and Other Controls
if you need help using any of the options and controls.
Changes made in the Size and Position menu are
applied immediately and are saved when you exit the
menu (press E
XIT

3.5.1 Resize Presets

NOTE: The same resize presets are available to all HD and SXGA+ screen models. However, the graphics
used to describe each preset in this section are of the SXGA+ models only.
Resize Presets will display an image in its native
resolution (no resizing) or will resize the image by
maximizing either the height, width or both height
and width, or will resize to the maximum size
possible while keeping the original aspect ratio.
Size, Position and Blanking parameters will
automatically adjust accordingly or, if Blanking is
set first, which defines an active input area; Resize
Preset scaling will occur in this region of interest
only. Resizing options are explained below.
Default Resizing: By default when displaying a
new source, your image will utilize as much of the display area as possible for the type of incoming source
data, but with minimal or no changes to aspect ratio.
The "Custom" re-size descriptor automatically appears in the Size and Position menu when any of the values
for Size, Vertical Stretch, H-Position, V-Position or Blanking do not correspond to those for a preset. This
option is not offered in the Resize Presets pull-down list.
• Select default for most sources (factory default). The image will be centered and displayed as large as
possible depending on the type of source.
J Series 2.0, 2.4 and 3.0 kW User Manual
020-100707-03 Rev. 1 (02-2014)
or M
ENU
).
Size and Position
1. Resize Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. H-Position
7. V-Position
8. Keep Aspect on Auto Setup
9. Blanking
Resize Presets
1. Default = maximize for current source
2. No Resizing = display in native resolution
3. Full Size = fill the screen (regardless of source)
4. Full Width = fill display width & keep aspect ratio
5. Full Height = fill display height & keep aspect ratio
6. Anamorphic = retain 16:9 aspect ratio
Custom (not selectable) = non-preset values for
Size, Vertical Stretch, H-Position,
V-Position and/or Blanking
Section 3: Operation
No Resizing
0.729
1.000
858
0
360
262
3-19