Panasonic Link2Cell KX-TGD862 Operating Instructions Manual

Panasonic Link2Cell KX-TGD862 Operating Instructions Manual

Cordless telephone with digital answering machine
Table of Contents

Advertisement

Model shown is KX-TGD862.
Before initial use, see "Getting Started"
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte "Guía Rápida Española", página 86.
For assistance, visit our Web site: http://shop.panasonic.com/support for
customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
TA Manual_TGD86x_0921.pdf
Link2Cell Cordless Telephone with
1
Operating Instructions
Digital Answering Machine
Model No.
KX-TGD862
KX-TGD863
KX-TG4263SK
KX-TGD864
2020/09/21
15:59:58

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic Link2Cell KX-TGD862

  • Page 1 Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 86. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf...
  • Page 2: Table Of Contents

    Table of Contents Introduction Programming Model composition ........3 Menu list .............40 Accessory information ........3 Alarm ............48 Graphical symbols for use on equipment and Silent mode ..........48 their descriptions ..........6 Baby monitor ..........49 Other programming ........51 Important Information Registering a unit ........51 For your safety ..........7 Caller ID Service Important safety instructions ......8...
  • Page 3: Introduction

    PNJA1186Z (Black cord), PNJA1193Z (Transparent cord) PNKL1044Y2 (Black), PNKL1044Y1 (White) See page 4 for replacement battery information. The handset cover comes attached to the handset. PNYNTGDA50BR (Black), PNYNTGDA50WR (White) PNLC1077ZB (Black), PNLC1077ZW (White) For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:58...
  • Page 4 This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached.
  • Page 5 R BlackBerry is owned by Research In Motion Limited and is registered in the United States and may be pending or registered in other countries. Panasonic is not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion Limited.
  • Page 6: Graphical Symbols For Use On Equipment And Their Descriptions

    Direct current (D.C.) “ON” (power) Protective earth “OFF” (power) Protective bonding earth Stand-by (power) Caution, risk caused by “ON”/“OFF” (power; visible radiation push-push) For indoor use only Caution, risk of electric shock For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 7: Important Information

    R Use caution when installing or modifying such devices to malfunction resulting in an telephone lines. accident. R The AC adaptor is used as the main disconnect device. Ensure that the AC For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 8: Important Safety Instructions

    – Replacement of a battery with an disposal instructions. incorrect type that can defeat a SAVE THESE INSTRUCTIONS safeguard. – Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 9: For Best Performance

    R Operating the product near electrical appliances may cause interference. Move Base unit location/avoiding noise away from the electrical appliances. The base unit and other compatible Panasonic units use radio waves to communicate with Routine care each other. R Wipe the outer surface of the product R For maximum coverage and noise-free with a soft moist cloth.
  • Page 10: Specifications

    Maximum: 4.5 W Charger: Standby: 0.1 W Maximum: 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 11: Getting Started

    (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226. R Follow the directions on the display to set up the unit.
  • Page 12 Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 8. Note for battery charging Battery charging R It is normal for the handset to feel warm Charge for about 7 hours.
  • Page 13: Controls

    R when answer by voice command is turned on (page 28). Speaker N (TALK) Dial keypad *: Temporary tone dialing 0: ( ) Ringer off MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone Receiver Display MOFFN ( For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 14: Display Icons/Indicators

    MjN/MkN (VOL.: Volume up/down) MERASEN Noise reduction is set. MCELL 2N (For pairing) (page 24) N (Skip) Equalizer is set. (page 24) N (PLAY/STOP) Message indicator ( For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 15 Ready to use it. Corresponding lines (1, 2: cellular line, L: landline) are indicated next to the item. If all lines are turned off, no line is indicated. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 16: Language Settings

    The MbN: Select the desired setting. a default setting is “Tone”. MSAVEN a MOFFN “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service. MMENUN#120 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 17 To turn this feature on, select the desired announcement interval, or select “Off” to turn this feature off. The default setting is “Every hour”. MMENUN#176 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 18: Link To Cell

    You can cancel the pairing of a cellular phone other Bluetooth device such as a Bluetooth that is stored in the base unit. headset is connected to your cellular phone. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 19: Link To Cell Settings

    Caller information is regular intervals when it returns within base announced even if the Talking Caller ID is unit range. You can set the interval. The turned off. default setting is “1 min”. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 15:59:59...
  • Page 20 “Off” in step 2, “Cellular line For CELL 1: MMENUN#6251 only mode (If you do not use the landline)”, For CELL 2: MMENUN#6252 page 20. R A long beep sounds. MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 21 PIN, and keep it confidential. Important: R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 81. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 22: Making/Answering Calls

    Note: charger. R The receiver or speaker volume you set is Note: kept for each line (landline and cellular R To switch to the speaker, press MZN. lines). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 23: Answering Calls

    Temporary handset ringer off: You can turn by pressing MCELLN. the ringer off temporarily by pressing M N (left If you press MCELLN and the soft key). selection list is displayed, select For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 24 Press MMENUN while talking. tone. Press MFLASHN to answer the 2nd call. MbN: “Equalizer” a MSELECTN To switch between calls, press MFLASHN. MbN: Select the desired setting. Press MOKN to exit. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 25 – When the hold or intercom feature is call. used. To complete the transfer: R When memory is/becomes full: Press MOFFN. – “Memory full” is shown on the To establish a conference call: display. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 26: Intercom

    – Only 1 cellular phone is paired. R When paging unit(s), the paged unit(s) – A specific line is set to make cellular beeps for 1 minute. calls (page 21). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 27 “On”, the monitoring handset or the baby monitor feature (page 51) will also answer baby monitor calls automatically. The default setting is “Off”. MMENUN#273 MbN: Select the desired setting. a MSAVEN MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 28: Answer By Voice Command

    Turning answer by voice command on/off Press and hold * for about 2 seconds. MbN: Select the desired setting. a MSAVEN R If you selected “Off”, go to step 4 to exit. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 29: Call Block

    – “Block range of numbers”: The unit R To edit the number: MMENUN a blocks calls that begin with a number stored MbN: “Edit” a MSELECTN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 30 MSAVEN a MOFFN MbN: “Yes” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Turning the first ring on/off You can choose whether the first ring sounds when a call is received. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 31 Call Block Displaying and clearing the blocked call count MCALL BLOCKN MbN: “Blocked calls count” a MSELECTN R To exit, press MOFFN. MCLEARN MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 32: Enhanced Call Block

    Changing the access code who is not registered in the phonebook, allow name list, or allow number database If the unit answers undesirable calls such as robocalls even though the automated call For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 33 Press MSTOPN to stop recording. MbN: Select the desired entry. a The unit will play the recorded greeting MMENUN message for automated call block. a MbN: “Save allow name” a MOFFN MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 34: Telemarketing Call Block

    – Answer by Answer by voice Command To answer the call: (page 28). Press M N or MZN. – Block call with call block feature To block the call: (page 29). Press MBLOCKN a MYESN. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 35 “1 ring” to “1 or 2 rings” or vice versa, – “1” on current caller list data will remain – incoming new call from the same number will be judged again For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 36: Phonebook

    MbN: Select the desired entry. a MSELECTN Switch between the R To edit the number, press * (Edit) uppercase and lowercase repeatedly until the phone number (A « a) is shown in the desired format. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 37 (page 21). MbN: Select the desired cellular To change group names phone. a MSELECTN MbN: “Group name” a MSELECTN a Edit the name (10 characters max.). a n Using a landline: MSAVEN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 38: Speed Dial

    MDN (Pause) to add Edit the name if necessary. a MOKN pauses after the number and PIN as Edit the phone number if necessary. a necessary (page 23). MOKN a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 39 (page 21). MbN: Select the desired cellular phone. a MSELECTN n Using a landline: Press and hold the desired speed dial key (1 to 9). To make a call, press M For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 40: Programming

    – – #323 Play all message – – #324 Erase all – – #325 message Greeting – #302 Record greeting Check greeting – #303 – #304 Pre-recorded (Reset to pre-recorded greeting) For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 41 – – #327 Answer on – – #328 Answer off Main menu: “Voicemail access” Operation Code Listening to voicemail messages. #330 Main menu: “Intercom” Operation Code Paging the desired unit. #274 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:00...
  • Page 42 <Tone 2> #6042 Pair – #6241 #6242 Unpair – #6111 #6112 Phonebook – – #618 transfer Headset – #621 Add new device – #622 Connect Disconnect Pair – #621 Unpair – #612 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 43 Memo alarm Alarm1–3 <Off> #720 Once Daily Weekly *1, *9 – <Caller ID auto> #226 – Time adjustment Manual Main menu: “Speed dial” Operation Code Viewing the speed dial entry. #261 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 44 <Caller ID auto> #226 – *1, *9 Time adjustment Manual Talking caller ID Handset <On> #162 #G162 Base unit <Off> Low battery alert – #176 <Every hour> Every 3 hours Every 6 hours For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 45 Block unknown CID Block #240 (CID: Caller ID) <Unblock> One ring for <Yes> #173 blocked call Blocked calls – #177 count Speed dial – – #261 – – #302 Record greeting For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 46 300 ms 400 ms 600 ms <700 ms> 900 ms *1, *17 A <B> #122 – Set line mode – <On> #194 Call sharing Registration Register handset – #130 – #131 Deregistration For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 47 If you select “On”, the tone sounds 2 times. *12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21...
  • Page 48: Alarm

    Once: outside calls. This feature is useful for time Enter the desired month and date. a periods when you do not want to be disturbed, MOKN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 49: Baby Monitor

    – between a handset and the base unit R To cancel the selected group: MbN: Select the group. a Press MMENUN#268 MSELECTN again. “ ” disappears. MbN: “On” a MSELECTN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 50 Enter the desired number. a MOKN monitoring call. a MSELECTN Press MMENUN on the handset being R “Baby monitor” will be displayed. monitored. Note: MbN: “Sensitivity level” a R The registered name/number is displayed. MSELECTN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 51: Other Programming

    A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 52 Programming MMENUN#131 R All handsets registered to the base unit are displayed. MbN: Select the handset you want to cancel. a MSELECTN MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 53: Caller Id Service

    – Only 1 cellular phone is paired. phonebook is displayed and logged in the – A specific line is set to make cellular caller list. calls (page 21). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 54 R Phone numbers from the 4 most recently Using a cellular line: edited area codes are automatically edited. To make a cellular call, continue from step 4, “Viewing the caller list and calling back”, page 53. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 55 Erasing selected caller information MCN CID MbN: Select the desired entry. MERASEN a MbN: “Yes” a MSELECTN a MOFFN Erasing all caller information MCN CID MERASEN a MbN: “Yes” a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 56: Using Bluetooth® Devices

    MbN: Select “Auto” or “Manual”. a call. MSELECTN – “Country code”: Your country code for “Auto”: Download all entries from the international calls. cellular phone automatically. Go to step 5. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 57: Link To Cell App

    Link to Cell app. If you turn the alerting Follow the on-screen instructions. app on, your DECT phone alerts you with the Important: corresponding information. R For further information, refer to the instructions on web page listed above. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 58: Text Message (Sms) Alert

    For CELL 1: MMENUN#6041 – iPhone: Bluetooth must be turned on. For CELL 2: MMENUN#6042 – Handset: “Alert On/Off” must be MbN: Select the desired setting. a turned on (page 58). MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 59: Remote Voice Assist

    10 m (33 feet) Wait until “Voice assist” is displayed. range. R A confirmation tone sounds. You cannot use a Bluetooth headset to R Speakerphone is turned on talk on a cellular line. automatically. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 60 You can cancel a pairing of the headset that is R You can only switch from the base unit to stored to the base unit. your headset. MMENUN#612 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 61 Press your headset’s button. Adjusting your headset receiver volume Base unit Press MjN or MkN repeatedly while using your headset. Note: R Depending on your headset, the receiver volume may not be adjustable. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 62: Answering System For Landline

    “Greeting only”, callers’ Press MANSWER ON/OFFN to turn on/off the messages are not recorded and the unit answering system. plays a different pre-recorded greeting message asking callers to call again. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 63: Listening To Messages

    Play all messages MjN or MkN Adjust the speaker volume Play greeting message Repeat message Record greeting message Skip message Turn answering system on N (STOP) Stop playback MPAUSEN Pause message For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 64: Advanced New Message Alerting Features

    The base unit calls a phone number number is shown in the desired format you specify. You can then operate the (page 54). answering system remotely to listen to the new message. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 65 MOFFN n When the remote access code is set to “Inactivate”: Editing the set phone number Press 4 to play the new message during the announcement. MMENUN#338 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:01...
  • Page 66: Remote Operation

    Press * in step 2 on “Remote access code”, Play all messages page 66. Stop playback R The entered remote access code is deleted. Start voice guidance Turn answering system off Erase currently playing message For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 67: Answering System Settings

    MbN: Select the desired setting. a MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings “Ring count” before the unit For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 68: Useful Information

    “Voicemail msg. via phone co.” is password as necessary. Contact your displayed if message indication service is phone service provider for the required available. pause time. MMENUN#330 R The speakerphone turns on. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 69: Wall Mounting

    Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 70 (2 types). 83 mm (3 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for ( ) and ( ) respectively. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 71 To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). Charger Drive the screws ( ) (not supplied) into the wall. 27.2 mm (1 inches) For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 72: Error Messages

    Make sure that other Bluetooth devices are not connected to the cellular phone, and try again. Memory full R The recording memory is full. Erase unwanted recordings (page 64). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 73: Troubleshooting

    R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 51). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 74 R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone.
  • Page 75 R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 76 R The answer by voice command feature is turned off. To call using voice commands. turn it on, see page 28. R Baby monitor is set to “On”. Turn off the baby monitor feature (page 50). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 77 R Depending on your phone service provider, the unit may or announced late. display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 78 After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 79 R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 80 R If you have multiple voice recognition features installed in your cellular phone, you may need to set the desired voice recognition feature as the default. If you cannot set the default, delete the other voice recognition features. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 81 I cannot remember the PIN. R Change the PIN using the following method. MMENUN#619 *7000 Enter the new 4-digit PIN. a MOKN Enter the new 4-digit PIN again. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 82 If the unit does not work properly, contact an authorized service center. Caution: R To avoid permanent damage, do not use a microwave oven to speed up the drying process. For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 83: Fcc And Other Information

    (if telephone company will notify the customer applicable) when using this phone. Consult as soon as possible. Also, you will be with your audiologist or Hearing Aid For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 84 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 85 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil TIA-1083 For assistance, please visit http://shop.panasonic.com/support TA Manual_TGD86x_0921.pdf 2020/09/21 16:00:02...
  • Page 86: Guía Rápida Española

    Appendix Customer services Shop Accessories! for all your Panasonic gear Go to h p://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Ba eries, Backup Chargers &...
  • Page 87: Limited Warranty (Only For U.s.a.)

    If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,...
  • Page 88 If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Panasonic Corporation of North America Consumer Affairs Department 8th FI. Two Riverfront Plaza...
  • Page 89: Index

    Index Dialing mode: 16 Direct command code: 40 Index Display Contrast: 46 3-way conference: 25 Language: 16 Additional handset: 51 Eco mode: 13 Alarm: 48 Equalizer: 24 Answer by voice command: 28 Error messages: 72 Answering calls: 23 Flash: 24, 46 Answering system Groups: 37 Call screening: 67...

Table of Contents