Handling And Installing Media; Loading Roll Media - MUTOH ValueJet VJ-1604W Operation Instructions Manual

3.2 HANDLING AND INSTALLING MEDIA

Notes

Refer to "General info on usable media" for details on media handling.

We recommend using tested and compatible media for this printer.
Refer to "General info on usable media" for types and details of media.

3.2.1 Loading roll media

Notes

There are two optional winding systems available for the ValueJet 1604W
Unwinder/Winder 100
o
Motorized winding system with tensioning (T winder)
o

Please refer to the User Guide of the chosen system to know how to correctly load media
Refer to the pricing sheet for more details of these systems.

If you do not use one of the above winding systems. You have to use the scroller which is supplied with
the printer.

For media with a three inch core, three inch core adapters have to be used.
Notes

Set the roll media on a flat and levelled surface.

If the roll media and scroller are placed in a vertical position, the scroller might get damaged.
Notes

The following roll media can be attached to the scroller supplied with this unit.
Media tube diameter: three inches, outside diameter of media: 150mm or less, weight: 30kg or less.
o
Be sure to read and understand the safety warnings before handling the printer.
Operation Instructions ValueJet 1604W
28 AP-77300 – Rev 1.1 -17/09/2009,
Chapter 3 : Installing the Unit