Take-Up Unit Menu; Media Loading Position - MUTOH vj-1617h Operation Manual

VJ-1617H OPERATION MANUAL
5.3.3

Take-up unit menu

Set the operation of the optional take-up unit.
NOTE
• When the take-up unit is not installed, do not set the take-up unit menu to "On".
By doing so, the product will be unable to function properly.
TIP
•For details about the optional take-up unit, contact your local MUTOH dealer.
Setup item
Take-up
5.3.4

Media loading position

Set the media loading position manually if you are using the media that cannot be detected, such as
transparent media.
NOTE
• This menu is only available when the media width/top edge detection (media initial 2) is set to Off
or "Width".
5.2.2.7.2 Media width/top edge detection (media initial 2)
• This menu is only available for the media that is loaded.
If the media loading position is changed after replacing the media, set this menu again.
Setting
<Off>
On
—
Description
The take-up unit is not used.
Set to use the optional take-up unit.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3 Setup menu
5-27
Panel setup menu