Daily Maintenance And Storage - GRAPHTEC FC 4500 Series Service Manual

4

DAILY MAINTENANCE AND STORAGE

Daily Maintenance
During the course of daily plotter operation, be sure to observe the following precautions.
• Never lubricate the mechanisms of the plotter.
• If the plotter's casing becomes dirty, wipe the soiled areas using a dry cloth or a cloth that has been moist-
ened in a neutral detergent diluted with water.
Never use thinner, benzine, alcohol, or similar solvents; they will damage the casing's finish.
• If the writing panel becomes dirty, wipe it using a dry cloth. In case of stubborn stains, use a cloth that has
been moistened in a neutral detergent diluted with water.
Never use benzine, thinner, alcohol, or similar solvents to clean the panel.
Storing Your Plotter
To store the plotter when it is not being used, be sure to observe the following points:
• Remove the cutter and/or plotter pen attached to the pen holder and cover its tip with the protective cap
provided.
• To protect the plotter from dust and dirt, cover it with a cloth.
• Avoid storing the plotter in places subject to direct sunlight or high temperatures.
FC4500-UM-251-9370
4 DAILY MAINTENANCE AND STORAGE
15