7510-XXX
5. Remove Sensor (booklet unit media entrance) (A).
Sensor (booklet media compiler in) removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Disconnect the connector from the Sensor (booklet media compiler in) (A).
4. Remove the screw securing the Sensor (booklet media compiler in) bracket from the booklet unit assembly.
5. Remove the screw securing the Sensor (booklet media compiler in) (A) from the bracket.
6. Remove Sensor (booklet media compiler in) (A).
Sensor (booklet unit media exit) removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Remove the screw securing the Sensor (booklet unit media exit) bracket from the booklet unit assembly.
4. Disconnect the connector from the Sensor (booklet unit media exit) (A).
5. Remove the screw securing the Sensor (booklet unit media exit) (A) from the bracket.
4-138
MFP Finisher Service Manual
Right
"Booklet unit assembly removal" on page
Left
"Booklet unit assembly removal" on page
A
Connector
"Booklet unit assembly left cover" on page
Connector
A
"Booklet unit assembly left cover" on page
4-121.
4-128.
4-121.
4-128.