Remove sensor (booklet knife HP) (A).
6.
Sensor (booklet media entrance) removal
Remove the booklet unit chassis. See
1.
2.
Disconnect the connectors from the sensor (booklet media entrace) (A).
Remove the screw securing the sensor (booklet media entrace) bracket from the pinch roll frame.
3.
Remove the screw securing the sensor (booklet media entrace) (A) from the bracket.
4.
Remove sensor (booklet media entrace) (A).
5.
Connector
A
"Booklet unit chassis removal" on page
A
Right
Left
Connector
7558-xxx
4-332.
Repair information
4-383
Previous
Next
Go Back