Media Compiler Unit Assembly Removal - Lexmark X940e Service Manual

7510-XXX

Media compiler unit assembly removal

1. Remove the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the rear lower cover. See
4. Remove the upper media bin assembly. See
5. Remove the upper media bin vertical cover. See
6. Remove the stapler unit frame. See
7. Remove the media eject clamp motor assembly. See
page 4-65.
8. Remove the media eject unit assembly. See
9. Remove the media eject motor assembly. See
10. Loosen the four screws securing the plate (A) to the finisher.
11. Move the plate to the right and outward.
12. Remove the plate.
4-68
MFP Finisher Service Manual
See"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
"Rear lower cover removal" on page
"Upper media bin assembly removal" on page
"Right eject cover removal" on page
"Stapler unit frame removal" on page
"Media eject clamp motor assembly removal" on
"Media eject unit assembly removal" on page
"Media eject motor assembly removal" on page
A
4-26.
4-23.
4-22.
4-19.
4-20.
4-53.
4-58.
4-77.
Rear