Sensor (Stacker Bin Level 1) Removal; Sensor (Stacker Bin Level 2) Removal - Lexmark X940e Service Manual

Sensor (stacker bin level 1) removal

1. Remove the finisher front door assembly. See
2. Remove the rear upper cover. See
3. Disconnect the connector from the sensor (stacker bin level 1) (A).
4. Remove the screw securing the sensor (stacker bin level 1) (A) to the finisher.
5. Remove the sensor (stacker bin level 1) (A).

Sensor (stacker bin level 2) removal

1. Remove the finisher front door assembly. See
2. Remove the rear upper cover. See
3. Disconnect the connector from the lift tray height sensor (stacker bin level 2) (A).
4. Remove the screw securing the sensor (stacker bin level 2) (A).
5. Remove the sensor (stacker bin level 2) (A).
"Rear upper cover removal" on page
Front
Connector
"Rear upper cover removal" on page
A
"Finisher front door assembly removal" on page
A
"Finisher front door assembly removal" on page
Connector
7510-XXX
4-26.
4-23.
4-26.
4-23.
Rear
Repair information
4-33