Sensor (Buffer Path) Removal - Lexmark X940e Service Manual

Sensor (buffer path) removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the upper media bin assembly. See
4. Remove the top cover. See
5. Remove the left lower cover. See
6. Remove the left upper cover. See
7. Remove the punch carriage assembly. See
8. Disconnect the connector from the sensor (buffer path) (A).
9. Remove the screw securing the bracket (B) to the finisher.
10. Remove the bracket (B).
11. Release the hooks securing the sensor (buffer path) (A) to the bracket (B).
12. Remove the sensor (buffer path) (A).
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
"Top cover removal" on page
"Left lower cover removal" on page
"Left upper cover removal" on page
"Punch carriage assembly removal" on page
A
Connector
Left
4-23.
4-18.
4-27.
4-28.
B
Repair information
7510-XXX
4-19.
4-40.
4-91