Stacker Bin Lower Limit Error - Lexmark X940e Service Manual

7510-XXX

981.02 Stacker bin lower limit error

Step Check
1 Check the media stacker bin actuator for proper operation.
Is the media stacker bin actuator installed properly?
Does it enter the sensing area of the sensor (stacker bin
upper limit)?
2
Check the sensor (stacker bin no media) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin no media.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
3 Is the sensor (stacker bin no media) properly connected?
Is the above component properly connected?
4 Check the sensor (stacker bin level 1) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level1.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
5 Check the sensor (stacker bin level 1) for proper
connection.
Is the above component properly connected?
6 Check the sensor (stacker bin level2) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Bin Level.
5. Touch Stacker bin level2.
Does the display on the operator panel change every time
the sensing area of the above sensor is interrupted or
blocked?
7 Check the sensor (stacker bin level 2) for proper
connection.
Is the above component properly connected?
2-56
MFP Finisher Service Manual
Yes No
Go to step 2. Repair the media
stacker bin
actuator.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (stacker connection.
bin no media).
Go to step 6. Go to step 5.
Replace the Replace the
sensor (stacker connection.
bin level 1).
Go to "Sensor
(stacker bin level
1) removal" on
page 4-33.
Go to step 8. Go to step 7.
Replace the Replace the
sensor (stacker connection.
bin level 2).
Go to "Sensor
(stacker bin level
2) removal" on
page 4-33.