Booklet Front Tamper Motor Removal - Lexmark X940e Service Manual

Mfp finisher

Hide thumbs Also See for X940e:

Table of Contents

5. Remove sensor (booklet rear tamper HP) (A).

Booklet front tamper motor removal

1. Remove the booklet unit assembly. See

"Booklet unit assembly removal" on page

2. Remove the booklet unit assembly left cover. See

"Booklet unit assembly left cover" on page

3. Disconnect the connector from the booklet front tamper motor.

4. Remove the two screws securing the booklet front tamper motor from the tamper frame assembly.

Repair information