Booklet unit assembly removal
1. Open the finisher front door assembly.
2. Slide the booklet unit out.
3. Release the two latches securing the booklet unit (A) from the guides.
4. Remove booklet unit (A).
Booklet folding/exit drive motor assembly removal
1. Remove the booklet unit assembly. See
2. Disconnect the connectors from the booklet unit motor assembly (A).
3. Remove the five screws securing the booklet folding/exit drive motor assembly (A) from the booklet gear train
frame.
4. Remove the booklet folding/exit drive motor assembly (A).
"Booklet unit assembly removal" on page
A
4-121.
Repair information
7510-XXX
4-121