Sensor (Booklet Front Tamper Hp) Removal - Lexmark X940e Service Manual

7510-XXX
4. Remove the front tamper guide (A).
B
Right
Left
A

Sensor (booklet front tamper HP) removal

1. Remove the booklet unit assembly. See "Booklet unit assembly removal" on page 4-121.
2. Remove the booklet unit assembly left cover. See "Booklet unit assembly left cover" on page 4-128.
3. Disconnect the connector from the booklet front tamper sensor.
4. Remove the screw securing the sensor (booklet front tamper HP) bracket from the booklet unit assembly.
4-131
Repair information