7510-XXX
Step
Check
4
Check the appropriate sensor (punch unit side reg pair)
connection.
Is the above component properly connected?
5
Check the punch carriage shift motor assembly for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Tests.
4. Touch Punch carriage shift mtr.
5. Touch Forward or Reverse.
Does the above component operate properly?
6
Check the punch carriage shift motor for proper
connection.
Is the above component properly connected?
7
Perform a POR.
Does the error continue when the power is turned off/
on?
2-74
MFP Finisher Service Manual
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Yes
No
Replace the
Replace the
appropriate
connection.
sensor (punch
unit side reg
pair).
Go to
"Sensor
(punch unit side
registration
pair) with
bracket
removal" on
page
4-43.
Go to step 7.
Go to step 6.
Replace the
Replace the
punch carriage
connection.
shift motor
assembly.
Go to
"Punch
carriage shift
motor assembly
removal" on
page
4-42.
Replace the
Problem solved.
finisher controller
card assembly.
Go to
"Finisher
controller card
assembly
removal" on
page
4-115.