Sensor (Bridge Unit Top Cover Interlock) Removal - Lexmark X940e Service Manual

Mfp finisher

Hide thumbs Also See for X940e:

Table of Contents

8. Remove the two small brackets (C).

Sensor (bridge unit top cover interlock) removal

"Bridge unit assembly removal" on page

1. Remove the bridge unit assembly. See

2. Remove the bridge unit right cover. See

"Bridge unit right cover removal" on page

3. Raise the bridge unit top to its full upright position.

4. Release the hooks securing the sensor (bridge unit top cover interlock) (A).

5. Remove the sensor (bridge unit top cover interlock).

Repair information