7510-XXX
Step
Check
2
Check the sensor (media eject shaft HP) for proper
connection.
Is the above component properly connected?
3
Check the media eject motor assembly for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Tests.
4. Touch Media eject mtr.
Does the above component operate properly?
4
Is the media eject motor assembly for properly
connected?
Is the above component properly connected?
5
Check the media eject clutch assembly for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Tests.
4. Touch Media eject clutch.
Does the above component make an audible clicking
noise?
6
Is the media eject clutch assembly connected
properly?
Is the above component properly connected?
2-72
MFP Finisher Service Manual
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Yes
No
Replace the
Replace the
sensor (media
connection.
eject shaft HP).
Go to
"Sensor
(media eject
shaft HP)
removal" on
page
4-78.
Go to step 5.
Go to step 4.
Replace the
Replace the
media eject
connection.
motor assembly.
Go to
"Media
eject motor
assembly
removal" on
page
4-77.
Go to step 7.
Go to step 6.
Replace the
Replace the
media eject
connection.
clutch assembly.
Go to
"Media
eject clutch
assembly
removal" on
page
4-76.