Booklet Unit Front Door Assembly Removal; Sensor (Booklet Unit Media Entrance) Removal - Lexmark X940e Service Manual

Mfp finisher

Hide thumbs Also See for X940e:

Table of Contents

5. Remove sensor (booklet knife folding) (A).

Booklet unit front door assembly removal

1. Remove the booklet unit assembly. See

2. Remove the e-clip securing the shaft X from the booklet unit.

3. Remove the four screws securing the front door assembly from the frame of the booklet unit.

4. Remove the bushing.

5. Remove the booklet unit front door assembly (A).

1. Remove the booklet unit assembly. See

2. Disconnect the connectors from the Sensor (booklet unit media entrance) (A).

3. Remove the screw securing the Sensor (booklet unit media entrance) bracket from the pinch roll frame.

4. Remove the screw securing the Sensor (booklet unit media entrance) (A) from the bracket.

"Booklet unit assembly removal" on page

Repair information