Punch Unit Assembly Removal - Lexmark X940e Service Manual

7510-XXX

Punch unit assembly removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Remove the upper media bin assembly. See
4. Remove the top cover. See
5. Remove the punch carriage assembly. See
6. Remove the screw securing the cover (A) to the punch unit assembly (B).
7. Remove the cover (A).
8. Remove the two screws securing the bracket (C) to the punch carriage assembly (D).
9. Remove the bracket (C).
10. Remove the three screws securing the punch carriage assembly (D) to the punch unit assembly (B).
11.Remove the punch unit assembly (B).
4-44
MFP Finisher Service Manual
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
"Top cover removal" on page
"Punch carriage assembly removal" on page
C
4-23.
4-18.
D
B
A
4-19.
4-40.