Lexmark X940e Service Manual page 63

Error code or
Error contents
message
289.01 sensor (booklet unit media
entrance) lag jam
Paper jam
289.02 sensor (booklet unit media
entrance) static jam
Paper jam
289.03 sensor (booklet compiler media
in) static jam
Paper jam
289.04 sensor (booklet unit media exit)
late jam
Paper jam
289.05 sensor (booklet unit media exit)
lag jam
Paper jam
289.06 sensor (booklet unit media exit)
static jam
Paper jam
980.03 Communication error with
finisher controller card
Service finisher
assembly
comm
981.00 Sensor (stacker bin level 1)
late error
Service finisher
error Sensor (stacker bin level 2)
late error
981.01 Stacker bin upper limit error
Service finisher
error
981.02 Stacker bin lower limit error
Service finisher
error
982.00 Sensor (front tamper HP) late
error
Service finisher
error
Description/action
The media reached the sensor (booklet unit media
entrance) but did not clear it within the specified time.
Go to "289.01 sensor (booklet unit media entrance)
lag jam" on page 2-44.
Media remains on the sensor (diverter gate).
Go to "289.02 sensor (booklet unit media entrance)
static jam" on page 2-46.
Media remains on the sensor (booklet compiler media
in).
Go to "289.03 sensor (booklet compiler media in)
static jam" on page 2-47.
The media is late reaching the sensor (booklet unit
media exit) within the specified time after the booklet
knife solenoid is turned on.
Go to "289.04 Sensor (booklet unit media exit) late
jam" on page 2-48.
The media reached the sensor (booklet unit media exit)
but did not clear it within the specified time.
Go to "289.05 Sensor (booklet unit media exit) lag
jam" on page 2-50.
Media remains on the sensor (booklet unit media exit).
Go to "289.06 Sensor (booklet unit media exit) static
jam" on page 2-51.
A communication error has occurred with the upper
printer engine card assembly and the finisher controller
card assembly.
Refer to the MFP Service Manual.
The sensing area of the sensor (stacker bin level 1) or
Sensor (stacker bin level 2) is not interrupted within the
specified period after the stacker bin starts rising.
Go to "981.00 Sensor (stacker bin level 1) late error"
on page 2-52.
The sensing area of the sensor (stacker bin upper limit)
is not interrupted when the stacker bin raises to its upper
most limit.
Go to "981.01 Stacker bin upper limit error" on
page 2-54.
The stacker bin lowers beyond the specified lower limit
within the specified time.
Go to "981.02 Stacker bin lower limit error" on
page 2-56.
The sensing area of the sensor (front tamper HP) is not
interrupted when the front tamper starts moving to the
home position.
Go to "982.00 Sensor (front tamper HP) late error" on
page 2-58.
7510-XXX
2-5
Diagnostic information