Finisher Front Door Assembly Removal - Lexmark X95x series Service Manual

Remove the finisher diverter gate solenoid (A).
7.
Note: The link (C) may remain inserted into the finisher.
Connector
Remove the link.
8.
Note: When the link is removed, the finisher diverter gate may become detached. See
gate removal" on page

Finisher front door assembly removal

Open the finisher front door assembly (A).
1.
Remove the three screws securing the finisher front door assembly.
2.
B
Clamp
)
C
4-344.
Clamp
A
7558-xxx
C
"Finisher diverter
Repair information
4-345
Previous
Next
Go Back