Front door assembly removal
See the part number for the Front door assembly for the specific model you need on
1.
Remove the front access cover assembly. See
2.
Remove the rear frame cover. See
3.
Remove the LVPS. See
4.
Disconnect the JTPS1 cable (A) from the system board.
5.
Release the left and right front door assembly cable springs (B) from the front door assembly.
"Front access cover assembly removal" on page
"Rear frame cover removal" on page
"Low-voltage power supply (LVPS) removal" on page
5026
page
7-5.
4-19.
4-33.
4-98.
4-79
Repair information